HA1000 - Amine Mag Beads - Functionalized Magnetic Beads - Magnetic Beads (50nm-4.5μm) - By Products Type
Contact: 858-689-8808

HA1000

Details

These are hydrophilic Hi-Sur Mag (1 µm) with amine groups. These surface groups allow covalent amide bond formation to proteins/peptides via primary amine or thiol groups. The beads exhibit rapid binding chemistry and low non-specific binding of nucleic acids. Amine or thiol modified oligonucleotides, antibodies or other ligands can easily be coupled to the beads. Activation through BS3 or Sulfo-SMCC is required. The 1 µm Hi-Sur Mag Amine Beads have a large surface area, high capacity, efficient magnetic pull and a slow sedimentation rate during incubation. The 1 µm Hi-Sur Mag Beads have around three times larger surface area than 1 µm Mono Mag Beads to ensure their higher binding capacity.

Features:

  • Immediate and gentle coupling at low temperature and neutral pH
  • High binding capacity
  • Significant low non-specific binding to proteins and nucleic acid
  • Better or comparable performance with Sera Mag Speedbeads Amine-blocked Particles

 Applications:

Ideal for isolation of small components such as proteins and peptides. Immobilization of primary amine or thiol groups modified labile proteins/peptides and nucleic acids. Low non-specific binding of proteins and nucleic acids.

Specification:

Product Description: Amine Modified Superparamagnetic Beads with Large Surface Area
Solvent: DI water, 0.05% NaN3, 0.01% Tween 20
Concentration: 10 mg/mL
Particle Size (nominal): 1 μm
Surface Group: Amine
Functional Group Density: 0.6 mmol/g
Magnetic Content: >60%
Number of Beads in 1 mL: 1.2×1010
Storage: 2-8 °C; Do not freeze. Keep vial upright.

Catalog# Product Unit Size Unit Price Quantity
HA1001 Amine Hi-Sur Mag Magnetic Beads-2 mL 2 mL $99.00
HA1002 Amine Hi-Sur Mag Magnetic Beads-15 mL 15 mL $349.00
HA1003 Amine Hi-Sur Mag Magnetic Beads-100 mL 100 mL $1,499.00
Particle Size 1
Product Description Amine Hi-Sur Mag Magnetic Beads, 1 µm
Surface Hydrophilic
Functionality Amine

1.  PRODUCT AND COMPANY IDENTIFICATION

1.1  Product identifiers

Product name:  Amine Hi-Sur Mag Magnetic Beads

Catalog Number:  HA0150, HA1000

1.2  Relevant identified uses of the substance or mixture and uses advised against

Identified uses:  Laboratory chemicals, Manufacture of substances

1.3  Details of the supplier of the safety data sheet

Company:  Ocean NanoTech

                     7964 Arjons Dr

                     Suite G

                     San Diego, CA 92126

Telephone:  858-689-8808

Fax:  858-689-8809

1.4  Emergency telephone number

Emergency Phone #:  +1-703-527-3887 (CHEMTREC)

..........

Download

 

 

1. Can the magnetic beads be sterilized?
Yes, carboxylic acid or amine functionalized and silica coated magnetic beads can be sterilized by washing with 70% ethanol. Protein conjugated beads cannot be sterilized.

2. Can the magnetic beads be sonicated?
Yes, short time sonication (couple seconds up to 5 minutes) is a good way to reduce aggregation of the beads and create homogenous conditions for coating or coupling. However, we don’t recommend to sonicate our magnetic beads over 10 min especially for protein conjugated beads. 

3. Are magnetic beads compatible with organic solvent?
Our magnetic beads are compatible for most polar solvent such as ethanol, methanol, acetone, isopropanol, dimethyl sulfoxide (DMSO), dimethylformamide (DMF), and acetonitrile.

4. Are magnetic beads compatible with urea?
Yes, they are compatible with 6–8 M urea.

5. Are magnetic beads compatible with EDTA?
Yes, our magnetic beads are compatible with EDTA.